RCM AB logo
Close-up of RCM converting machinery

Swedish engineering.Built around your production.

RCM machinery is engineered and manufactured in Sweden, combining decades of engineering experience with modern drive and control technology.

But technology alone does not make a good machine.

Our focus is on flexibility, reliability and productivity — guided by customer feedback and real-world production needs.

Our History

RCM's engineering history dates back to 1953. From our beginnings in the Swedish paper industry to today's advanced converting machinery, decades of development, customer collaboration and practical production experience have shaped who we are today.

Original Research AB converting machinery logo from 1953

1953

Where It All Began

Research AB was founded by Mr. Lennart Pihl as a coating laboratory, working primarily with the Swedish paper industry.

This marked the beginning of the engineering experience and industry knowledge that would later develop into today's RCM.

Research AB first rewinder in production during the late 1960s

1960s

Our First Rewinder

At the end of the 1960s, Research AB introduced its first rewinder.

The machine quickly established itself as an industry standard for handling soft materials, including nonwovens used in wet wipes production.

This marked an important step in the company's development from its origins in the paper industry towards converting machinery.

Research AB folding machine developed during the 1970s

1970s

Developing Our First Folder

During the 1970s, we developed our first folding machine, designed for dry and large-format products such as tablecloths and surgical drapes.

Over the years, our folding technology has undergone continuous development, becoming increasingly flexible and adaptable to different production requirements.

With capabilities ranging from approximately 10 to 260 cm in cut-off length within a single machine, the technology reflects our long-standing focus on flexibility and adaptability.

Precision mechanical components from RCM machine engineering

1997

Strengthening Our Engineering Team

Mr. Örjan Winkvist joined the company as an engineer in 1997 and later became CEO of RCM.

QF-1000 wet wipes crossfolding machine in operation in 1999

1999

First Fully Automatic Crossfolding Machine for Wet Wipes

We introduced our first crossfolding machine specifically designed for wet wipes production — the QF-1000.

Today, the QF-1000 is a leading machine in its category and is used by well-known wet wipes manufacturers around the world. Our efficient manufacturing processes help us remain cost-competitive, further strengthening our position as an industry leader.

Drive systems and roller assembly inside an RCM machine

2003

A New Generation of Leadership

In 2003, Mr. Jan Pihl retired, passing the leadership of the company to Mr. Örjan Winkvist, who assumed the role of CEO.

This marked the beginning of a new chapter in the company's development.

Modern RCM production facility with machinery in operation

2018

A New Home for RCM

After many years of operating near Stockholm, RCM relocated to a new factory in Täby, just north of Stockholm.

The new location provides convenient access to Stockholm Arlanda Airport, approximately a 30-minute drive away, supporting our work with customers and partners from around the world.

Nonwoven material passing through the rollers of an RCM production line

2019–2023

Developing the 2-in-1 Wet Wipes Concept

Working closely with our customers, we developed a new machine concept: the 2-in-1 wet wipes machine.

This innovative technology was developed for a wide range of applications, including baby wipes, floor wipes, cosmetic wipes and more.

During this period, we successfully completed the patent application process, with the patent pending for this new technology.

Flex21 – 2 in 1 Wet Wipes Machine

2024

Introducing Flex21

In 2024, RCM introduced the Flex21 – 2 in 1 Wet Wipes Machine, featuring new patent-pending technology.

Flex21 enables the production of both flat-pack and crossfolded wipes across a wide range of sizes within one machine. Its technology allows wipes to be dispensed in the stronger direction of the material, providing greater flexibility across different wet wipe products and production requirements.

The StoryContinues.

RCM continues to develop by listening, learning and improving.

We combine our engineering experience with new technology and knowledge gained from working closely with customers around the world.

The objective remains the same: to build increasingly flexible, reliable and productive machines for our customers.

We Understand Machines.You Understand Your Production.

[ Our Approach ]

Your production knowledge.  Our engineering expertise.  One shared goal.

We understand machinery, engineering and manufacturing. You understand your products, materials and processes.

Through close collaboration, installation and technical support, we turn our combined experience into machinery designed around your production needs.

01

Flexibility

Every production environment is different. Our solutions are developed around different materials, products and production requirements.

02

Reliability

A machine is a long-term investment. Many RCM machines have remained in production for more than 30 years, demonstrating the long-term quality and reliability of our solutions.

03

Productivity

The real measure of a machine is how it performs in the customer's production environment. We focus on solutions that support efficient and consistent production.

Our Experts

RCM brings together a team of experienced specialists in engineering, machine design and technical support. Our team is closely involved in the development and building of our machines, as well as installation, training and after-sales support.

Örjan Winkvist, CEO & Chief Engineer at RCM

Örjan Winkvist

CEO & Chief Engineer

Engineering & Machine Development

Jörgen Backlund, Machine Designer at RCM

Jörgen Backlund

Machine Designer

Mechanical Design & Machine Development

Dennis Alexandrie, Technical Support & Installations Manager at RCM

Dennis Alexandrie

Technical Support & Installations Manager

Installation, Training & Technical Support

Talk to Our Experts

Have a question about our machines, service or a future project? Get in touch with RCM and we will help you find the right person.